Description
Quick and easy to use
AVERAGE 70,000
LITRES POOL (16' x 32' INGROUND)
1. Remove pool
cover and ice buffers (see note below).
2. Reinstall and/or close all drain
plugs. Flush and drain all piping to waste.
3. Remove any surface stains
and thoroughly clean away winter water line with AMAZE.
4. Reconnect
chemical feeding equipment, if any.
5. Fill pool to normal operating
level. While pool is filling add in STAIN PREVENT to prevent staining, scaling or
water discoloration.
6. Backwash and thoroughly clean filter with FILTER
CLEANER (following directions on bottle), then put filter into operation.
7. With pump and filter operating broadcast OXY PRO over surface of pool.
8. Wait 12 hours then add in ALGIKILL 600 following directions on the
bottle.
9. The next day test chlorine level. If level is between 1-2 ppm
commence regular chlorine program, if under 1 ppm, shock pool.
After operating pump and filter continuously for 48 to 72 hours, take a
water sample to YOUR IPG DEALER for a complete WATER ANALYSIS. If
necessary make adjustments to pH, ALKALINITY, HARDNESS and STABILIZER as
recommended by your IPG DEALER.
Allow pool water to filter
continuously for first week backwashing and cleaning filter as required.
Kelowna's Online Pool and Spa Equipment and Supply Superstore!